Outstage
Tests
Test load-distribution resistance deviation
Tests v1.1.0/pss/power-electronics/outstage/load-distribution/* make use
of a resistance \(R \approx 300 m \Omega\) because \(R = 100 m \Omega\) would
require cutting the available wire, which is not desired.
The test result is assumed to be of the same significance.
Outstage Unit #1.1
| Test ID | Status | Measured |
|---|---|---|
v1.1.0/pss/power-electronics/outstage/load-distribution/positive |
pass | \(U_{RE+,n} = 1.1 V\), \(U_{RE-,n} = 0.86 V\) |
v1.1.0/pss/power-electronics/outstage/load-distribution/negative |
pass | \(U_{RE+,n} = -0.9 V\), \(U_{RE-,n} = -1.1 V\) |
v1.1.0/pss/power-electronics/outstage/short-circuit/positive |
pass | \(U_{RE,n} = 1.04 V\), \(I_{Output} = 10.5 A\) |
v1.1.0/pss/power-electronics/outstage/short-circuit/negative |
pass | \(U_{RE,n} = -1.02 V\), \(I_{Output} = -10.4 A\) |
Outstage Unit #1.2
| Test ID | Status | Measured |
|---|---|---|
v1.1.0/pss/power-electronics/outstage/load-distribution/positive |
pass | \(U_{RE+,n} = 1.08 V\), \(U_{RE-,n} = 0.83 V\) |
v1.1.0/pss/power-electronics/outstage/load-distribution/negative |
pass | \(U_{RE+,n} = -1.10 V\), \(U_{RE-,n} = -0.85 V\) |
v1.1.0/pss/power-electronics/outstage/short-circuit/positive |
pass | \(U_{RE,n} = 1.2 V\), \(I_{Output} = 10.25 A\) |
v1.1.0/pss/power-electronics/outstage/short-circuit/negative |
pass | \(U_{RE,n} = -0.8 V\), \(I_{Output} = -10.18 A\) |